Question about a 79' chry. 360 motor and trans

[barebones]

I have a 79 chrysler 360 in my 55 Dodge. For a trans I have the stock 727 auto. It runs great but the problem is it is a 3 speed with the lock up converter. This was an early version of overdrive. I am looking for a better highway trans at least a 4 speed with overdrive. Does chrysler make a trans that will bolt up to the 360 or would it be wise for me to invest in an adapter and go with a chevy or ford trans. Any thoughts would be greatly appreciated.

Bob

[RileyRacing]

Yes, the newer tranny's (up to the early 90's anyway) have the same bolt pattern, you want something like an A999 I think...

Put this ? on the main board, you'll get better response!

Jay

[el Scotto]

What you're looking for is the A-500 or A-518 out of a later model Dakota. You'll need to do some fabbing, and an electric switch to engage the 4th gear (0.63 gearing! http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif ). I'm putting an A-518 into my '70 Challenger, and its easier than you'd think.