Need help with my Model A windshield.....

[flyin'eye]

What has to be done to get the glass out of a 30-31 windshield frame? I know that the top of the frame comes off, but that's where my knowledge ends. I pulled the screws out, cant get it apart. Is there a trick I need to know about, or do I just need to force it?

[Unkl Ian]

Sounds like it's been glued together.

[flyin'eye]

So what does a guy do? Bust the rest of the glass out of it and force it apart?

[36-3window]

it's either rusted or glued together like he said.. have you tried any PB blaster on it? they can be a bitch to take apart if they have been together for 70+ years

[four-thirteen]

mine had no glass in it and wasn't rusty and i still had to hammer it apart. they are a real bitch. make sure you got all the 6 screws before you go smacking on it.... david

[Corn Fed]

I've never been able to get one apart without busting the glass out first. Then oil the piss out of the ends, remove the 6 bolts, and use a rubber mallet to carefully break it apart. Good luck

[old beet]

I clamp them down on a table, use a short 2X4 and a BFH. And always grind the inserts down before reassembly.....OLDBEET