PDA

View Full Version : NEED INFO ASAP... Where is the VIN tag on a 55 Chevy truck?!


Travis
04-02-2004, 06:34 PM
Trying to go to DMV and get this thing on paper and Non-Oped... where is the VIN# on a 55 1/2 ton truck? Yes... this is the death truck...

Travis

Roothawg
04-02-2004, 06:49 PM
Should be a metal tag inside the drivers door jamb.

Travis
04-02-2004, 06:53 PM
Thats what I thought too... it must be gone http://www.jalopyjournal.com/ubbthreads/images/graemlins/frown.gif

I'll check it again...

Travis

Travis
04-02-2004, 07:07 PM
Well it looks like I am shit outta luck on that. Im going to have to go to DMV with a truck with no VIN tag on it...

Travis

Rodshop
04-02-2004, 07:08 PM
Yeah, should be on the front side of drivers door jamb, a shiney metal tag. Look for sings of rivets. Rodshop

seymour
04-02-2004, 07:43 PM
I dont think the 55s were riveted in. Do you have any kind of papers for the truck? Lots of times you can get away with a "VIN" number tag made at a trophy shop or just registering the motor number. at least in TX.

raven
04-02-2004, 09:31 PM
Do you have the original motor in it?
The #'s should be on it.
r

Rocky
04-02-2004, 09:37 PM
I got one off a 56 panel truck and it was riveted to the inside of the A-pillar on the driver's side...I don't have it anymore but I think Danchuk and/or Chevs of the 40's usta sell blanks...stamp your numbers and pop rivet thet sucker in place...

gettingreasy
04-02-2004, 10:13 PM
Use one outta a similar year car. Do tou HAVE to get it inspected? Just take the paper work in and they should belive you, are you going to the one off Harding or are you gonna go up to the Folsom one(they are rather "lax" up there).
-Jesse

Steve Ray
04-02-2004, 10:36 PM
Look for it stamped on the top of the frame rail under the hood. My '66 has it on the left side. Depending on the year you'll find a tag in the driver's door jamb on the windhield piller, or the top of the jamb. Look on the passenger side too.

DrJ
04-02-2004, 10:49 PM
CA CHP/DMV won't go by the door tag anyway.
They want the frame number which is on top of the drivers side frame rail right above the front axle.
Unless it's got a M-II front end welded on top of it or it's Camaro clipped. then you're SOL and will have to get a number assigned.
They can do that to.

Just take a wire brush to the crud on top of the frame, you'll find it

yorgatron
04-02-2004, 10:57 PM
it's wherever you want it to be! wanna borrow my pop-rivet gun? http://www.jalopyjournal.com/ubbthreads/images/graemlins/tongue.gif

Travis
04-03-2004, 11:08 AM
YAY!!! I found it. I will post a new topic on why I am doing this. But I actually found it on the frame above the axle and it's a 57! http://www.jalopyjournal.com/ubbthreads/images/graemlins/blush.gif

Thanks guys...

Travis

Rude Dude
04-03-2004, 06:26 PM
The serial numbers on frame are same as cab VIN numbers. Two spots on drivers side top of frame near steering box and right below cab

pickupman31
12-25-2010, 04:23 PM
i have some 56,57 stainless vin tags