Hamb stickers?????

[Rusty]

I seen some rides at the roundup with HAMB stickers with there names stuck on there windshield. How do you get these??? This showed great support for the hamb.

[Alfster]

I made some of these about a while back for the Kiwi HAMBers. I sent some of these to America. No, I don't have any left.

Just scan the picture you want and take it to a signwriting shop that does computer graphics. They should be able to print it for you.

[Smokin Joe]

Speaking of stickers...
Ryan you going to get those off the back burner soon?
I'm saving the H.A.C.K stickers for the 31.
ROAD TRIP season is beginning. http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif

[hotrodladycrusr]

AFTER he gets the t-shirts off the back burner bud http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[wingnutz]

[ QUOTE ]
AFTER he gets the t-shirts off the back burner bud http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

Can I hear an "AMEN" brothers and sisters?????? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Elrod]

I could use a T-Shirt. Hell, I'd buy two. one to wear, and one to help out Merc50 rub down those sweet rides at the show! Hell, MarkX is going to need them soon, too! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Smokin Joe]

Hell, we've done 2 T shirts since we started on the stickers. But we do need a new 2004 edition shirt.

[hotrodladycrusr]

[ QUOTE ]
Hell, MarkX is going to need them soon, too! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

I believe MarkX would look better barechested http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[BELLM]

Yeah, need a shirt bad. Saw several people @ Roundup Saturday wearing HAMB t shirts, stopped them, introduce meself, met some nice folks. How about it? Soon!!! I would buy 3 or 4 at least, then folks wouldn't think I'm just an old fker got lost stumbled into a rod event. Could use stickers, too. I'm proud to be a HAMBer!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Andy]

I need a shirt and stickers TOO!!! I want to spread the word and I am really happy to have found the HAMB. Cars had gotten boring and I was loosing interest. THANKS Ryan!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/laugh.gif

[A32Flathead]

[ QUOTE ]
I need a shirt and stickers TOO!!! I want to spread the word and I am really happy to have found the HAMB. Cars had gotten boring and I was loosing interest. THANKS Ryan!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/laugh.gif

[/ QUOTE ]


Took the words right outta my mouth....

http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif

[Ryan]

Fine... lets do t-shirts.

[momentumfoto]

How bout HAMB foam beer holders... ya know the foam ones for your coldy so your hand does not warm it up. haha kinda kidding but would be a hit for sure!

bp

[wingnutz]

[ QUOTE ]
Fine... lets do t-shirts.

[/ QUOTE ]

"WOOOOHOOO" http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif Can't wait!!!!!!

[zman]

Hell yeah, I'll take a few new T's....

[tinyelvis]

I'm in for shirts.. I had a sticker but it went w/the Wagon... http://www.jalopyjournal.com/ubbthreads/images/graemlins/frown.gif I hope George still has it! Maybe I should buy it back...

http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif

[hotrodladycrusr]

[ QUOTE ]
Fine... lets do t-shirts.

[/ QUOTE ]

I will do whatever neccessary to take the burden off you. My speciality is distribution. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Smokin Joe]

Well, if we're gonna do shirts again, I think the first car that should be on it is BIG OLDS! without a doubt, that's the car that best exemplifies the HAMB over the last year. We'd probably need a rod to go with it. Something like Sodbuster's rig maybe. And some hot licks from a HAMB striper or 2 to finish the job.

[hotrodladycrusr]

NO, Big Olds does NOT want to be on a HAMB t-shirts. Thanks for the thought though. It needs to be a VERY traditional design and I know Big Olds does NOT fit the bill. Ryan will come up with something kick-ass very soon I'm sure.

[Smokin Joe]

My other thought would be for a big, multicolor pinstriped thing. Something like a HAMBers update of a Harvey or Tiki like character. Devils, skulls, and Iron Crosses have been overdone. Mr Bones would be cool tho But who's licks would you chose? There are so many talented stripers on the hamb. Tough to pick just one...

And the red oxide primer color was a good idea. They would stand out in the sea of white and black shirts at every event.

I still like the idea of the shiftball logo on the front pocket area.

[Ryan]

Wasn't there a thread with some designs???? I think Django had some kick ass stuff too..

[Kinky6]

How about the HAMB shift ball on the front upper left, and Sodbuster's truck on the back?

I'd buy a couple!



Kinky6, T-shirt whore http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[hotrodladycrusr]

I've been searching for that old t-shirt thread and can't find it. Someone, must have toggled it as a favorite.

[sodbuster]

I liked this one:

http://www.mdesignstudio.com/chad/other/hambshirt.jpg

with the shifter Logo:
http://www.jalopyjournal.com/ubbthreads/image_uploads/199591-HAMBlogofin.jpg

And here is a link to the thread if someone wants to bring it back up.
http://www.jalopyjournal.com/ubbthreads/showflat.php?Cat=&Number=198206&page=&view=&sb=5&o =&fpart=all&vc=1


Chris Nelson
Kansas

[Smokin Joe]

That's the color & style I was thinking of Sodbuster. Beats hell out of the usual vast expanse of white over a beer gut and leaves room for a pocket that doesn't interfere with the design. I'd vote for that to be the front of the shirt. The back needs to be filled out more tho. I'd really like to see what Safarinut and Whodaki and others could do. Think of it as a trunk lid http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Django]

Tshirts again eh? Cool. Here's the other layouts I did, in addition to the one above...

http://www.mdesignstudio.com/chad/other/hambshirt2.JPG

http://www.mdesignstudio.com/chad/other/hambshirt3.JPG

http://www.mdesignstudio.com/chad/other/hambshirt4.JPG

[plmczy]

Denise, ricky2six started that thread. Sorry I don't have it toggled. hope it helps http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif. later plmczy

[Rocky]

Somebody came up with this design once. The truck is no longer a HAMB owned/operated vehicle so I doubt it's usage would be relevant.

[Smokin Joe]

Ryan we probably need to start a HAMB shirts thread.

[Broman]

About a million years ago I was rolling out a bunch of HAMB designs for a decal but they all seemed over the top, so I actually made a bunch of regular HAMB decals because Ryan had said he'd approve the simple design. (Just the word HAMB on a red rectangle).

Anywhooooo, I took some to the Hunnert Car Pile-up and GAVE them to the few HAMBsters that I actually got the chance to gab with. I had planned to send a few to Ryan for his approval, but never did - so I already have a bunch of these that I have made. I don't know how many I made - I will have to count them up, but it should be in the hundreds. The problem I have is that I paid outta my own pocket for these and I can't just give them away, but if it could be worked out - I could send them to the person who is distributing the shirts and the decals would go to the first folks that sent their money in for the shirts. Kind of an incentive to order fast ya know? As long as a fair price is trickled back to me...sorry to sound like a greed-monger here but it IS what I do for a living, and I have to feed and water this animal every day http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif :

[porknbeaner]

[ QUOTE ]
Yeah, need a shirt bad. Saw several people @ Roundup Saturday wearing HAMB t shirts, stopped them, introduce meself, met some nice folks. How about it? Soon!!! I would buy 3 or 4 at least, then folks wouldn't think I'm just an old fker got lost stumbled into a rod event. Could use stickers, too. I'm proud to be a HAMBer!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

Hell Bellm,
It wouldn't matter how many stickers or t shirts I had people would still think I was some old fker that just stumbled into a rod event.

But I'm down with stickers and t shirts. "I'm proud to be a HAMBer!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif" of course I don't know if the HAMB is proud of it. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[hotrodladycrusr]

She's adorable!!

What do you want per sticker? If a person wants a sticker and includes the amount in their t-shirt payment, "The Gay Michigan Bitches" distribution headquarters will gladly include whatever the "customr" wants. All this, of course, hinges on Ryans approval.

[Harrison]

The pinstriped shift pattern, A coupe, and Ryan's coupe kick ass. I'm in for one of each.

Could we talk about the red oxide color AND a gray shirt? Three red oxide shirts would be a lot of red oxide.

Another thought...Instead of a photograph over pinstripes, how about an atrist's rendering of the A coupe, custom, and Ryan's '38. More trouble for sure but it would give some of our more talented members a chance to show off their work -assuming they want to and have time. Trying to reproduce a photograph on a t-shirt could leave less than desirable results.

JH

[zman]

I'm down for paying for stickers, and if Denise will do the ditro then it'll be one stop shopping. Is there any reason why we can't do couple of Django's designs? I'm looking at getting a few of the shirts. If there are multiple designs I'll get more. Maybe we can do a preorder so there aren't any left overs...

[Django]

[ QUOTE ]
The pinstriped shift pattern, A coupe, and Ryan's coupe kick ass. I'm in for one of each.

Another thought...Instead of a photograph over pinstripes, how about an atrist's rendering of the A coupe, custom, and Ryan's '38. More trouble for sure but it would give some of our more talented members a chance to show off their work -assuming they want to and have time. Anyhow, that is just a thought.

JH

[/ QUOTE ]

That's a good thought if we use one of the layouts with a car.

BTW, in case you don't remember, Barnett's striping is used in all of my designs. Foiled Again did the shift logo.

[Ryan]

No chance in hell my car is making a shirt fellas... Way too many way cooler cars for that...

[Harrison]

Ryan don't take this as an attempt to kiss your ass, but your '38 is a fucking stunner!

JH

[Rix2Six]

Well I'm late to this thread but better late than never.

I started a thread on getting T-Shirts last October that had some way cool artwork from several different people... heck it was getting hard to pick cuz there were so many cool ideas. Anyway you can find the thread here. (http://www.jalopyjournal.com/ubbthreads/showflat.php?Cat=&Number=198206&page=&view=&sb=5&o =&fpart=all&vc=1)

I'm in for 3-4 Shirts and at least 4 Stickers.

Also, as I stated in the past thread, I'd be happy to help in anyway possible to support the HAMB.

I do have some connections for shirts and screen-printing but as I remember, there were people that were better connected than I.

I'd be happy to be of service to the HAMB in any way to get this done.

Rick

[345window]

Hey, I'm in for stuff...stuff is cool...I buy stuff all the time a flea's and swaps for no apparent reason...I sell stuff that I can't give away....justified in that it's a normal by-product of the (dare I say culture) the stuff we do. I'll buy a bunch of stickers and some tee's. How about some HAMB golf clubs, cut em up make shifter's, prop open garage doors when painting, push dishes around the fancy eating table...in a hunert years they will be worth a fortune!

[Broman]

Well I just wasted a bunch of time putting Ryan's car onto T-shirt designs........

Guess I better find a "cooler" car, pfftttt....

Anywho....
I made the decals in two different sizes

small = .5 x 3.125 inches
large = 1.0 x 6.5 inches

I had the idea that 1.0 was too small when creating the design but when they came out of the printer they looked huge. So I halfed my design and made some small ones too.

Turned out to be a great idea for obvious reasons, I could get twice as many stickers per page and they were simple enough to be really cool anywhere. They fit on windows, on tools, on radius rods, on shifters, just about anywhere you have a spare 1/2 inch !!!!

So basically I have to go and count them out to see what I can do, but my origional idea for a HAMB fund-raiser was to give 1 lg and 2 sm for 5 bucks, then I could take my cut and give the rest to the message board....my guess is that if you went to a sign shop and tried to get these decals it would cost you more than that because of the time/labor/and small size of the decal, but since I did this work at cost I could still give this kind of a deal in a larger scale and have it work out financially.

So I will take all suggestions according to price, you guys hash it out, I'll take whatever you see morally fit...

I like the idea of putting them with the first comers on the t-shirts, it might be a motivator. Like a big x-mas present - you better get your ass in gear if you want 'em...

If that sucks and people get pissed at missing the deal, maybe I can make more decals this summer....

[roadstar]

Broman, can you post a pic of your sticker so we can see what they look like.

And if Ryan says it's ok, figure out your cost , double it and give half to the board and the other half pays you back.

Everybodys a winner
http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[52Chief]

Stickers and shirts sounds good to me. Count me in on the deal when it gets all figured out.

[Muttley]

Either one of these would get my vote: http://www.mdesignstudio.com/chad/other/hambshirt2.JPG http://www.mdesignstudio.com/chad/other/hambshirt.jpg However they should be on a grey shirt with NO POCKET, pocket T-shirts are gay.

[Broman]

Well not too much of a graphic image, but here is what the decals look like. they are red all the way to the edges and the H.A.M.B. lettering is white - not cut out. This one is close to the size of the little ones - go ahead and put you tape measurers up to the screen.



How 'bout I just send the decals to the HAMBer doing the t-shirts and when it's all said and done someone sends me a check/money order -like it or lump it that's what I get.....

[Mai Ki-Ki]

Personaly I reckon thats about the best size for the HAMB stickers...should be that Subtle. not a 4 inch Rear Widow Sticker that everyone and his dog will see and want too.

Cheers

Maiki

[Django]

That is a good sticker. I like the idea of the shift knob logo about 1" in diameter for the same reasons. s u b t l e . 99% of the people will probably put them in a window somewhere on the car. They shouldn't be distracting. Just something when you see it, you think... "cool".

[Boones]

I think the 4 sp logo is best and would be a great sticker since it could be small.

[BELLM]

I like Broman's sticker, esp the small ones. And that little girl is a doll http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif( I gots grandaughters, one is 5 months old) Don't have a lot of front & rear window in my 32 so the small one would be great. Any T shirt design is ok by me, just so it has HAMB & a cool car on it, the 4 spd pattern is also nice. All I can contribute is money but there is a ton of talent here. Lets do it this time, don't let it fade away like last time. I'm sure everyone I meet with an appropriate car gets tired of me asking them if they post on the HAMB.

[andysdeuce]

I have plenty of hamb shirts but would buy a couple of the red oxide colored ones if they are offered. I would like to see someone make up some stickers for us so we can identify each others cars at events. It would also identify us to others so get ready for the "Is this a kit car...ratrod etc." questions. I just tell 'em it's whatever you want to call it. I know what it is. http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif

[Muttley]

This: http://www.jalopyjournal.com/ubbthreads/image_uploads/199591-HAMBlogofin.jpg would be the perfect sticker. http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[MBL]

Are we not afraid of biker gangs anymore?
Tim
MBL

[zman]

why would we be? I don't see anything wrong with red shirts...

[Broman]

The design for the HAMB shifter decal oozes cool but I have a three speed on the tree, I might be putting a 5-speed in her sooner or later and my dad runs an automatic. It would be kinda nerdy to put the faux four speed decal on one of these cars. Besides that it leans all the way towards the Hot-Rod side rather than the kustom side (we both have kustoms BTW). Just a thought....

If the shifter decal was made they'd be rad, but I wouldn't buy one - it just doesn't fit on my ride. I wouldn't have a beef if they won a popularity contest though.

[Django]

I disagree Broman. It's not like you're putting a "columbia rear end " decal on there if you don't have that rear end. It's a brand. It has nothing to do with how anyone's car is equipped. It's a logo that is quickly and easily recognized by anyone as a HAMBers car. It's akin to saying, "I'm not buying a shirt cause I don't like pinstriping". I'm not getting down on you, but as far as I'm concerned, that is a non-issue.

[hotrodladycrusr]

I was given a very cool HAMB sticker for Big Olds last summer from BobK aka:FaatRod that I believe he got from 40Studedude. Maybe Roger or Bob can post that one. I love it and gets tons of compliments on it. I'll take a photo of it later tonight and post if neither one of them do. I think Roger made them on his home computer/printer.

[lakes modified]

I'm for the "T" shirts and the shift knob sticker, so someone "just do it". i'll take mine yesterday, if that's ok. the season is upon us, so the need is ASAP ?. when they are available, get it posted in CAPS.

[hotrodladycrusr]

Here's the sticker that BobK gave me last summer that I believe 40StudeDude made. Been on Big Olds for about 5-6,000 miles now. Not worn out yet http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Crestliner]

I usually don't express my opinion on things like this, but the HAMB logo as on the site is were we are at. Seems everyone has a round sticker some where on their car. Give people somthing to recognize when looking for this site. While I'm rambling, put a car on the shirt. It will draw more attention. My 2 cents.

[Broman]

I hate to start a pissing match D'jango but I really dissagree to that - If I don't run Brand-X somewhere on my car why would I put Brand-X stickers on it? Kinda sound like a poser thing to do if you ask me. Like wearing a Nike jogging suit and wearing Timberlands on yer feet. It's just weird to me I guess - stickers for the sake of stickers, just so you look cool. I dunno, I could be wrong.

Regardless the offer stands....someone make shirts and I will put the decals into the mix....

[Broman]

ut-ooh, Grimlock's going to be pissed......

[hankcash]

As far as the sticker design... I vote for the classic, small route. I think that things are better when ther don't jump out and get in your face. I am thinking about 4 inches long and about 1.5 inches tall.
simple, effective and cool...
Regarding the tees, I feel that there needs to be 2 different designs. One with the kitchen sink (bigger logos, cars, pinstriping) and one that is vanilla. I myself prefer the simple designs on tees, but there are those out there that prefer the larger crazy stuff.....

Here is my vote for the sticker.....

[hankcash]

aged sticker...

[hankcash]

I would like a tee with the simple hamb red and white logo on the sleeve (the sticker design) and this on the back about 8 to 9 inches across in size...

[hankcash]

That being said, let me know if I can be of assistance.
I am head of Product Development for a 250 store teen retailer (I will not go into details of said chain as I do not want to start a whole other can of worms). But, I design tees all day long at work and have relationships with several tee manufactures and printers in the US.
I think the that way to go with printing is a discharge print (the print is screened either from underneth or it is just a "one pass" screen) this gives the screen an old and aged look and a very soft non-abrasive hand and feel...
let me know how I can help...
HC

[Django]

The aged box logo looks bad ass!

[Jojo]

Django- While I dig the colaborative designs you came up with earlier and would wear it proudly, Hankcash's aged designs are also sweet. Tough decisions ahead.

With his connections for shirts we may be able to maximize the $$$ for the HAMB. Just a thought. You guys with the designs are bad ass and thanks for all the work getting this together.

[Django]

Like I said, the aged rectangle sticker rules.

As for the shirt, from a branding standpoint, I don't like the idea of the masthead logo appearing on the same shirt as the shifter logo. They fight with one another and show a lack of consistancy. It has to be one or the other, IMO.

We can apply that aged look to whatever design is chosen.

[hankcash]

For you drinkers in the house....

[hankcash]

Texas style....

[hankcash]

better...

[Alfster]

<font color="red"> This is the design that I had made for the Kiwi Hambers.

I have these on the modified and these ones were Crusin's spares that he put on the windows of our new '55 last weekend.

There are few sets of these in America. </font>

[Toqwik]

I think Plowboys space truck would make a cool t-shirt. thats my 2 cents....Toqwik

[yngrodder]

I like the shifter sticker or the one with ryans coupe. and T-shirts I think a small shifter in the left upper corner in front and a large pinstripe with the coupe on the back.

[hotrodladycrusr]

Alfster, I've gotten alot of compliments from HAMB folks on the sticker you designed. I really love it, thanks.

[59Rocket]

I have a couple friends who work at print shops and often do side jobs both stickers and t-shirts. Get some money together and we could have shirts and stickers done in a week or two. I like most of the designs offered. For stickers the Kiwi one works for me.

[Rix2Six]

I vote for the Kiwi stickers too.

[Alfster]

<font color="red"> No, I didn't design it. There was a post here about a year and a half ago on this same subject and there were a bunch of neat ideas posted. I just 'stole' the one I liked.
I did have copies of all the suggested decal ideas but I lost them in a computer crash. Yes, I know I should have backed it all up. </font>

[Broman]

That was a Grimlock design, that's why I said he'd be pissed.....

[flamedcoupe]

I'll put my vote in on the 4 speed sticker and the primer t shirt with the pinstripped design with 4 speed or Ryans coupe. 345windon needs to go back on his medication.

[CadillacKid]

Alright, count me in too...here's another thought...if you guys can decide on a design, my old man's got a screen printer....makes alot of shirts, including the ones for my band....if we had the design, we could be hammerin' 'em out already! I'll pitch in with the screen printing time if you guys want to decide on a design....let me know...