03-28-2004, 10:21 AM
Do residual valves have to be mounted horizontal or can they be vertical? Every application that I have seen recently shows them horizontal. Also I read somewhere that they need to be mounted no more than a foot from the master cylinder. Is that true?
03-28-2004, 11:17 AM
i just installed 2 willwood valves in the vertical position, about 6" from the master. works great. i don't recall the willwood directions mentioning anything about a horizontal/vertical preference.
03-28-2004, 12:16 PM
Vertical/horizontal ---no difference...and AS CLOSE to the master cyl. as possible ......
03-28-2004, 05:38 PM
approx 74 chevy pu truck has the peoportioning valve mounted out in front of the radiator, about 4-5 feet from the master as the tubing routes.
03-29-2004, 07:45 PM
Should the residual valve be before or after the proportioning valve?
03-29-2004, 11:03 PM
Found this diagram a while back, can't remember where, but I kept it. Maybe some of you guys could use it.