Spraying inside doors etc.......

[Hotroddder]

How do you folks spray DP or other sealer and rust killers inside doors or tight panel areas. I need to seal the inside of some doors that have been blasted. They are not very rusty inside, but I would like to seal up what is there.

I could pour in some DP and the rock the doors, but that would not work very well on the inside panel, just the door skin and the bottom....

I am looking at the Eastwood undercoating gun with the flexible wand. It sounds like it would spray DP...

Thanks, Hotroddder.......

[earl schieb]

The Eastwood tool might work, but I suspect it's designed to move a lot of high viscosity material--DP will just spew out of it like water thru a garden hose.Just my suspicions....
Ever think of using cavity wax? All the auto mfgrs use it in tight places for corrosion protection. Just don't apply it until the car's painted, cause it'll run out of the drain holes/joints/etc and paint WON'T stick to it.

But what do I know...I'm earl schieb http://www.jalopyjournal.com/ubbthreads/images/graemlins/smirk.gif