ART, How to make a personalized license plate

[safariknut]

This may not be the most high tech post,but it's what I do so if you're interested follow along.The plate will be a Michigan tag but the technique applies to all license plates.
The base color of the plate is 1-Shot Light Blue and the numbers are medium gray.I used the Light Blue rather than Process Blue so I could impart a slight highlight with the Process and the same for the Gray using White as a highlight.Actually the colors are mixed on the palette but I'll describe how that is accomplished.
I also think I'll do this one a little different in that I'll post the pictures with the text to make it an easier read.This is going to take awhile so please wait to post comments until the whole thing is strung together.
I start by selecting a scrap piece of aluminum(left over from a panel I cut up)and lay out the dimensions.FYI all license plates are now a standard 6"X12".I believe that has been in force since 1957 so if you are doing a plate that is earlier than that be sure to measure it.I know my 55 plates are larger.
Anyhow I use a standard pair of tinsnips to cut the blank to size.You can drill holes in it at this time but the one I am painting is going to have painted holes in it.It's just a display piece anyway.

[safariknut]

trimming the piece.Yes I use the hood of my car for a workbench;it's just the right height and it's got the scratches to prove it!

[safariknut]

Next I paint the base color.In this particular case,I elected to brush paint it rather than spray it because 1-Shot goes everywhere when you spray it and I have an open flame heater(s)in my shop and we don't even WANT to go there!Besides I have a very nice(and expensive)1" lettering brush that works great for this.
After it has dried I lay out the lettering with my trusty Stabilo using another painted plate for a reference.I could've used a real plate but they are buried in a box somewhere and I didn't want to take one off a car(too lazy).
At the end of this I'll show a couple examples of plates I've done plus a real one for comparison.

[safariknut]

the lay out

[safariknut]

I then start the lettering using 1-Shot medium gray and a #2 Jenson Swirly-Q(available from Mack Brush).I use this brush for a lot of things from small lettering jobs to small flames to striping on model cars.
I don't use tape to define the top and bottom of the letters and numbers because if you look closely at a plate the letters are raised and when paint is applied they have slightly rounded corners and are not dead even.Also on a Michigan plate(the blue ones anyway)the plate area is raised slightly starting about 1/4" in from the edge(which is the highlight in the picture).The lettering base color is then finished.

[safariknut]

another painted plate in background

[safariknut]

Now the shadow is added to the letters.As stated in previous techs,the shadows I prefer are located at 4 o'clock position.To explain,look at the letter and think of it as the face of a clock.If the light source that is illuminating the letters is at 10 o'clock,the shadow will be 180 degrees opposite or at 4 o'clock.This has to remain constant throughout in order to make it look real.
For my shadow,instead of using a standard color,I mixed the plate color 50/50 with a darker blue(Reflex Blue)to obtain a realistic shadow of the raised letter and the raised area of the plate and the holes.This is painted on carefully to make sure it is in the right position.

[safariknut]

Gee it's almost starting to look like a plate!

[safariknut]

Next I mix up a batch of base color and medium gray;not quite 50/50;mix and try a spot and see how it looks.Remember you're trying to make it look slightly lighter than the base but not a "hot spot".More about that later.The lighter highlight is done 180 degrees from the shadow.Don't forget the raised area around the perimeter of the plate and the holes!

[safariknut]

Now the "hot spots" are added.These are nothing more than a white dot or two located at the 10 o'clock position and serve to show the light source reflecting on the high spots of the numbers and letters.You'll notice that they reflect not only on the raised sides of the numbers but also slightly onto the surface of them.It may not be technically correct but it brings them out better and besides it's only a painting!
The last thing to do(at least for now)is to paint in the bolt holes in black.And it's finished!(almost)
You may notice a small green square in the lower right corner of the plate. That is the validation sticker which I will add later when the paint is dry.Just black lettering with the month and expiration date and plate number.
And that is basically it.I've included pics of two fake and one real plate here also.
Hope you enjoy this and I welcome your comments.
Ray

[safariknut]

the almost finished product

[safariknut]

an unreal plate

[safariknut]

another unreal plate

[safariknut]

a real plate.Sorry for the lousy pic;the light isn't too good there.

[Machinos]

Those are insanely realistic. I was going to ask how you stamped out the letters on the "PINHEAD" one, then I read more http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif

[Unkl Ian]

From 10 feet away,the PINHEAD plate looks real.
I understand how,and why,and I'm still amazed.

[safariknut]

Here's a better shot of my front plate and one I did for my son last year.

[safariknut]

and the other complete with bullethole

[fuel pump]

Ray,
You never cease to impress me with your talent and your willingness to share cool stuff with us. Thanks http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[G V Gordon]

Ray, I go back to school every time you post. Thanks for sharing.
George

[34Fordtk]

Sweet they look SO real....is it real or is it DMV! http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif

[Fat Hack]

Great tech post, Ray...I'll save a FORTUNE buying plates now!!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/crazy.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Excellent work as always, Sir!!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[nor cal nic]

well, shut my mouth... thanx for the post... and nice manicure btw.http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif
nic

[plmczy]

WOW http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif. It looks so easy till I think about it to much http://www.jalopyjournal.com/ubbthreads/images/graemlins/tongue.gif. later plmczy

[JimC]

I think your plates will get by the trooper with the best of eye sight.

Great style and your explanation is easy to follow.

i would vote this one of the all time best post.

Jim

[cool57]

Fan-plating-tastic! How many hours do you have in that?

[BARNETT]

Ray...that's f*ckin' GREAT!!!!!!!

[safariknut]

[ QUOTE ]
Fan-plating-tastic! How many hours do you have in that?

[/ QUOTE ]
Actually not very long.I started this one yesterday by cutting it out,scuffing,wax and grease removing,and base coating it;maybe 10 minutes there.The actual painting only took maybe 40 minutes total.I usually paint wet-on-wet so it doesn't really take long at all.

[Tman]

Very cool man!

I dont know about other states however, but South Dakota is switching to a printed flat plate that is not embossed at all. They are using the same vynil tech that road signs are made with. They look pretty crappy IMHO.

[FORDY 6]

Amazing...looks authentic with the sticker!

[safariknut]

The final version with detailed validation sticker

[safariknut]

closeup

[Hot Rod To Hell]

Hey Ray, I dunno if it's anything you'd use (or if you already have it), ANd I also don't know how much I have, but I have some GREEN and some WHITE reflective metal tape, which is THE stuff that the state used to use on speed limit etc.(white) signs, and the stuff for expressway (green) signs. It would make them look EXACTLY like real tags! http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[safariknut]

[ QUOTE ]
Hey Ray, I dunno if it's anything you'd use (or if you already have it), ANd I also don't know how much I have, but I have some GREEN and some WHITE reflective metal tape, which is THE stuff that the state used to use on speed limit etc.(white) signs, and the stuff for expressway (green) signs. It would make them look EXACTLY like real tags! http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[/ QUOTE ]

I appreciate the offer,but it was not my intention to phony up a plate;just to have some fun with what I had for materials at hand.If you notice on the sticker,the expiration date is 1944 and the little numbers next to it are my birth date so if I ever got stopped with it on the car,they couldn't say I was using fraudulent tags.
My wife did a wall in our house awhile ago that simulated cinder blocks with moss and vines growing around them and if you stand back and look at it,it appears real.Pic enclosed.
Ray

[Hot Rod To Hell]

[ QUOTE ]
I appreciate the offer,but it was not my intention to phony up a plate

[/ QUOTE ]
I understand Ray... That's not what I was gettin at. I noticed the date, and thought it'd be cool do do the same thing, just with a touch more "realism".

[TINGLER]

WOW!

I really dig this.
Thanks for posting this "how to"...

IT rocks. http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif

VT.

[lotus]

Amazing work!!!

[DoubleClutch]

Great job Ray! love your work! Thanks for the step by step!

[4t64rd]

I used a slightly different version as a lad of 15, using some carpet tape, and a piece of shirt box. we have (for the most part) white plates. An orange marker and a green marker and a real FL plate to use as a model.

A dark night and Presto! The neighborhood dick that was a year older than I with a car daddy bought him now has a new vanity plate. Never got to see the look on his face when the cop pulled him over and pointed out his "FAGGOT" license plate. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Unkl Ian]

BTTT

[Fast Elvis]

Sweet touch Ray!!....certainly have great depth in your craft!!

[fuel pump]

Ray,
Thanks for the tech post. Very cool.

[gotcha]

I know I'd have to take a few looks before stopping a car with those tags...

JP

[A32Flathead]

Incredible work, thanks for sharing your talent with us all.

Dave

http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif