Tiny's F1 chassis ...almost low enough!!

[brewsir]

Tiny has been working at my shop building his chassis...Volare front clip,made his own rear notch...should be pretty low (after he buys dropped spindles for the front!!!)

He would post it himself...but he's busy welding and shit!

[chaco]

Looks good, like its gonna be able to pancake in the back. Does somebody make volare drop spindles?

[bigron]

fatman fabrications has 2" dropped spindles for volare.
fatmanfab.com is the link. pretty spendy though.. $435.00 a pair !!

[brewsir]

OUCH..thats spendy! This thing shouldn't be tooo low in the rear...he has pretty tall tires. The boards should be about 4 inches off the ground (best guestimation)

[Tiny]

Thanks Brewsir
Motor and tranny mounts hopefully go in today

[ratster]

Gonna be low. Is that for your panel truck?

[brewsir]

naw thats for tiny's F1...the panel truck gets started in April or so!

[SMOKINFLATHEAD]

433090

433091

433092
I plan on buying those spindles, need to lower the front of my truck just a bit more, want a nice ride also! wonder if the back of his will be about like mine? the last pic is of my 50' merc frame, and yes! it's on the ground!

[Mark in Japan]

nearly low enough! :D

http://i236.photobucket.com/albums/ff160/Oz52F1/MyTruk1.jpg

http://i236.photobucket.com/albums/ff160/Oz52F1/NoBagz.jpg

http://i236.photobucket.com/albums/ff160/Oz52F1/Nobagz2.jpg