The slazzen r/pu PROGRESS

[slazzen]

I finished my motor mounts

[slazzen]

another angle

[slazzen]

made a grille support that will also be used to mount the radiator I used OCC round bar LOL

[slazzen]

check out my bones I drilled them then filled the holes with stainless 38 shells

[slazzen]

another angle of the front

[slazzen]

I took off the hodials and will remount them under the spring perches will look cleaner

[slazzen]

last one this week I also had to put a rearend in the tahcoma so i didnt get as much done as i would have liked to

[fab32]

Is your radiator going to mount above your spring mount or behind it. Looks like you are making good progress.


Frank

[dondanno]

Looks good bro...

[slazzen]

the radiator will be above the spring mount I have a 19x19 space up there

[BARNETT]

Looks real good to me!

[Levis Classic]

What is the engine for that thing - SBC orr SBF?

[slazzen]

I am running a sbc with old eldy valve covers and a super old mallory dizzy with a McGurk 6x2 intake with 6 97`s on it

[Thirdyfivepickup]

[ QUOTE ]
check out my bones I drilled them then filled the holes with stainless 38 shells

[/ QUOTE ]

Wow you got a little OCC and a little Jesse James in there! http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif

Seriously, looks cool! Its a neat idea!

[ckdesigns]

Nice work. Where did you get that steering arm from?

[cleatus]

solid work brother!

[slazzen]

its a speedway steering arm I will probably not use it though I will look for a old one or make one the last one I used was junk all the threads disintagrated