Need some help...

[**DONOTDELETE**]

I want to remove these mounts on my motorcycle forks for a new 4" headlight. what would be the best way to remove them without damaging the fork?? Thanks in advance
p.s- the iron cross was just me messin around with a cut off wheel
http://www.jalopyjournal.com/ubbthreads/images/graemlins/smirk.gif

[**DONOTDELETE**]

damn no one has any suggestions?? was thinkin i could use the cut off wheel then the angle grinder....didn't know if mabye a torch would be easier. how strong are the stock welds???

[NortonG]

What is the tube made from? If it is steal use a grinder be careful not to fuck up the tube.

[FeO2]

Shitcan the tube all together.If the fork tube under the cover is rusty,you can go to the hardware store & buy a chrome sink drain pipe and cut to size for a cover.

[zman]

Just pull the fork tube oout of the triple tree and you can knock those babies out of there.

[**DONOTDELETE**]

[ QUOTE ]
Shitcan the tube all together.If the fork tube under the cover is rusty,you can go to the hardware store & buy a chrome sink drain pipe and cut to size for a cover.

[/ QUOTE ]

hmmm..good idea didn't think of that..thanks guys